banner_image ×
SeaArt AI Enterprise Version

Create a welcome arch for Cauayan City Isabela, use bamboo and muahrooms as desi

Create a welcome arch for Cauayan City Isabela, use bamboo and muahrooms as design make it crwative and welcoming , make wider and larger like a an overhead boundary marker of a town, but keep the design, make it wider and put metals and carved rocks but the designs are still bamboo and mushrooms put "WELCOME TO CAUAYAN" 

Use this instrction in designing the welcome arch To ensure that construction of welcome arch/overhead boundary marker structures and installation of overhead utility and power lines across and along national highways will provide sufficient horizontal and vertical clearances, the following guidelines with typical sections are hereby prescribed:

A. Welcome Arch/Overhead Boundary Marker:

1. To give allowance for future road improvement and widening, welcome arch's/overhead boundary marker's posts shall be located at 2.0m setback from the road right-of-way (RROW) limit to give allowance for the space allotted for underground utilities per D.O. No. 26, s. 2011, re: Policy on Diggings/Excavations by Private and Public Utilities on National Roads, as shown in Typical Sections 1 and 2, Annex "A").

2. Welcome arch/overhead boundary marker shall be provided with minimum vertical clearance of 5.33m from the roadway surface as shown in Annexes "A" and "B".

3. On critical fill slope (where vehicles have high propensity to overturn) and on non- traversable cut slope, welcome arch's/overhead boundary marker's posts may be allowed along the edge of the shoulder provided the posts shall be shielded with appropriate barrier, (Typical Sections 3 and 4, Annex "B").

4. On road sections where there are RROW constraints, like in urban areas, posts shall be located along the edge of the sidewalk, (Typical Section 5, Annex "C").

B. Overhead Utilities and Power Lines:

1. For overhead utility and power lines crossing the roadway where traffic comprise of trucks, vertical clearance shall not be less than 5.50m meters from the roadway surface to the calculated lowest
chatIcon
I've got something special just for you today.
Create AI Character
image
avatar
F
Fox the Swiper
Generation Data
Records
Prompts
Copy
Create a welcome arch for Cauayan City Isabela , use bamboo and muahrooms as design make it crwative and welcoming , make wider and larger like a an overhead boundary marker of a town , but keep the design , make it wider and put metals and carved rocks but the designs are still bamboo and mushrooms put "WELCOME TO CAUAYAN" Use this instrction in designing the welcome arch To ensure that construction of welcome arch/overhead boundary marker structures and installation of overhead utility and power lines across and along national highways will provide sufficient horizontal and vertical clearances , the following guidelines with typical sections are hereby prescribed: A . Welcome Arch/Overhead Boundary Marker: 1 . To give allowance for future road improvement and widening , welcome arch's/overhead boundary marker's posts shall be located at 2 . 0m setback from the road right-of-way (RROW) limit to give allowance for the space allotted for underground utilities per D . O . No . 26 , s . 2011 , re: Policy on Diggings/Excavations by Private and Public Utilities on National Roads , as shown in Typical Sections 1 and 2 , Annex "A") . 2 . Welcome arch/overhead boundary marker shall be provided with minimum vertical clearance of 5 . 33m from the roadway surface as shown in Annexes "A" and "B" . 3 . On critical fill slope (where vehicles have high propensity to overturn) and on non- traversable cut slope , welcome arch's/overhead boundary marker's posts may be allowed along the edge of the shoulder provided the posts shall be shielded with appropriate barrier , (Typical Sections 3 and 4 , Annex "B") . 4 . On road sections where there are RROW constraints , like in urban areas , posts shall be located along the edge of the sidewalk , (Typical Section 5 , Annex "C") . B . Overhead Utilities and Power Lines: 1 . For overhead utility and power lines crossing the roadway where traffic comprise of trucks , vertical clearance shall not be less than 5 . 50m meters from the roadway surface to the calculated lowest
INFO
Prompts
Create a welcome arch for Cauayan City Isabela, use bamboo and muahrooms as design make it crwative and welcoming , make wider and larger like a an overhead boundary marker of a town, but keep the design, make it wider and put metals and carved rocks but the designs are still bamboo and mushrooms put "WELCOME TO CAUAYAN" Use this instrction in designing the welcome arch To ensure that construction of welcome arch/overhead boundary marker structures and installation of overhead utility and power lines across and along national highways will provide sufficient horizontal and vertical clearances, the following guidelines with typical sections are hereby prescribed: A. Welcome Arch/Overhead Boundary Marker: 1. To give allowance for future road improvement and widening, welcome arch's/overhead boundary marker's posts shall be located at 2.0m setback from the road right-of-way (RROW) limit to give allowance for the space allotted for underground utilities per D.O. No. 26, s. 2011, re: Policy on Diggings/Excavations by Private and Public Utilities on National Roads, as shown in Typical Sections 1 and 2, Annex "A"). 2. Welcome arch/overhead boundary marker shall be provided with minimum vertical clearance of 5.33m from the roadway surface as shown in Annexes "A" and "B". 3. On critical fill slope (where vehicles have high propensity to overturn) and on non- traversable cut slope, welcome arch's/overhead boundary marker's posts may be allowed along the edge of the shoulder provided the posts shall be shielded with appropriate barrier, (Typical Sections 3 and 4, Annex "B"). 4. On road sections where there are RROW constraints, like in urban areas, posts shall be located along the edge of the sidewalk, (Typical Section 5, Annex "C"). B. Overhead Utilities and Power Lines: 1. For overhead utility and power lines crossing the roadway where traffic comprise of trucks, vertical clearance shall not be less than 5.50m meters from the roadway surface to the calculated lowest
CFG Scale
Steps
25
Sampler
euler
Seed
672559229
Scheduler
Image Size
688 X 1024
Model
SeaArt Infinity
Generate
Size
688X1024
Date
Aug 31, 2024
Mode
Studio
Type
cell
Checkpoint & LoRA
SeaArt Infinity
Checkpoint
SeaArt Infinity
#Realistic
#SeaArt Infinity
0 comment
0
0
0

SeaArt Swift AI Apps

ai_video_generationimg
AI Video Generation

Unleash your imagination and let AI create visual wonders for you

face_swap_titleimg
Face Swap Online Free

Create funny or realistic face swap videos & photos in a snap

cartoon_avatar_h1img
Cartoon Avatar Maker

Turn your photos into unique cartoon avatars instantly.

vrtry_cloth_h1img
Virtual Try on Clothes

Try on any type of clothes virtually with AI.

fuse_anyoneimg
AI Image Fusion

Combine two images into new one stunning visual with AI Image Fusion.

video_face_swapimg
Video Face Swap

Create funny videos by swapping faces in any video clip.

Explore More AI Apps 

Explore Related

ControlNet
logo
English
Application
Create Image AI Characters Swift AI Model Training Canvas AI Apps Workflow
About
Studio Rankings AI Chat AI Blog AI News
Help
Guides Customer Service
Get App
icon
Download on the
APP Store
icon
GET IT ON
Google Play
Follow Us
iconiconiconiconiconiconiconicon
© 2025 SeaArt, Inc.
Copyright Policy
Terms
Privacy 特定商取引法 資金決済法に基づく表示
More