











If you have only one ControlNet unit go to the Settings > ControlNet and set "Multi-ControlNet: ControlNet unit number" to 2 or more. Click "Apply settings" and restart UI.
In ControlNet unit 0 use Preprocessor: none and Model: openpose. Drop openpose image here and enable it.
ControlNet mode for OpenPose set to "Balanced".
In ControlNet unit 1 use Preprocessor: none and Model: lineart. Drop lineart image here and enable it.
ControlNet mode for Lineart set to "ControlNet is more important".
If you want to use img2img (which I recommend) use img2img + ControNet Lineart with Ending Control Step set to 0.8.
1. Hak untuk model yang diposting ulang adalah milik pembuat aslinya.
2. Pencipta asli yang ingin mengklaim model harap hubungi staf SeaArt AI melalui saluran resmi. Klik untuk mengklaim
