Video Combination v12.05c

🟩FPS自動調整に変更しました v12.05c (2026.01.05)
2つの動画のFPSレート調整してから結合Appsを使うという手間が面倒過ぎるという事で、Combine the two videos by aligning them to the specified FPS from the beginning.。The playback time is maintained.。24 or 30 seems appropriate.。

🟩2つの動画とaudioを結合する機能
【Added the end cut function of the first part】(2025.12.20)
You can cut and combine around the last frame of the first part。

【Delete ON/Abolish the OFF switch】(2025.01.05)
If you want to cut, please specify the number of sheets to cut。
Specifying -1 will turn off the cut function。
0 is probably an error in the SeaArt specification, so if you are not using the delete function, be sure to set it to a negative value.。
(If the value is negative, it will operate with 0 frames cut internally.)

This will eliminate the 2-frame overlap at the seam.、You can set the seam to any position in the first part.。For example, if you generate the second half of the video based on the image 15 frames before the end, setting the number of cuts to 15 will connect it cleanly without overlap.。
audioがある場合は前編のaudioトラックも同比率で少し切りますので、後編のaudioがずれる事もないはずです。

The method to extract any frame image to create the second part is
Video Duplication(Forward and Reverse Playback) and optional frame extraction v25.21b (workflows)
Video Duplication・フレーム抽出
または Extract a specific frame image from the video (Apps)
Extract a specific frame image from the video

It is possible here.。

【image size】
The finished size will be the same as the size of Video1. / It will be the aspect ratio.。
If Video2 is a different size but the aspect ratio is the same, it will only be a simple enlargement or reduction.、If the aspect ratio is different, it will be adjusted to a state without margins, and the trimming will be for the excess cut.。
(I forgot to explain that I had assumed the same size😅)
It is recommended to combine the same size.。

【audio】
2つの動画とaudioがそのまま結合されます。
またaudioをOFFにして結合する事も可能です。
(toggle switch：Grayout is OFF、 Color is ON)
※ただしaudioトラックがない動画を使う場合は必ずその動画のaudioスイッチを オフ にしてください。audioトラックがない動画をオンで結合しようとするとエラーになります。

【audioOFFでの作成 ＝ 無音トラックに無音のaudioあり】
audioOFFにすると動画と同じ長さの無音トラックを書き込みます。
Therefore, the finished product will not have sound、audioトラックありになります。

【FPS】
２The method has been changed to automatically adjust the different FPS of the two videos to the specified FPS and combine them.。
I think SeaArt is often 24 or 30, so either one is okay.。