บริษัท

"Create a 3D model of a cylindrical cam with a complex profile obtained by rotat

มีเรื่องสนุกๆ ที่เธอควรรู้คนเดียว

สร้างตัวละคร AI

"Create a 3D model of a cylindrical cam with a complex profile obtained by rotating a flat profile around an axis. The cam diameter should be 100 mm and the height 50 mm. The cam should be made of aluminum with a surface finish to reduce friction.. The function of the profile is f(X) = 0.02 * X^3 - 0.3 * X^2 + 1.5 * X. A rolling rocker arm must also be created that follows the profile of the cam.. The diameter of the rocker arm must be 20 mm and its length 30 mm., Made of steel with surface treatment for durability. The rocker arm must be mounted to contact the cam surface, allowing a linear movement of the follower. Los archivos deben ser eXportados en formato STL con alta resolución para impresión 3D."

CRISTIAN JOEL ORTIZ CHACHA

Generation Data

บันทึก

คำพรอมต์

คัดลอกคำพรอมต์

"Create a 3D model of a cylindrical cam with a complex profile obtained by rotating a flat profile around an axis . The cam diameter should be 100 mm and the height 50 mm . The cam should be made of aluminum with a surface finish to reduce friction .. The function of the profile is f(X) = 0 . 02 * X^3 - 0 . 3 * X^2 + 1 . 5 * X . A rolling rocker arm must also be created that follows the profile of the cam .. The diameter of the rocker arm must be 20 mm and its length 30 mm ., Made of steel with surface treatment for durability . The rocker arm must be mounted to contact the cam surface , allowing a linear movement of the follower . Los archivos deben ser eXportados en formato STL con alta resolución para impresión 3D . "

ข้อมูล

คำพรอมต์

"Create a 3D model of a cylindrical cam with a complex profile obtained by rotating a flat profile around an axis. The cam diameter should be 100 mm and the height 50 mm. The cam should be made of aluminum with a surface finish to reduce friction.. The function of the profile is f(X) = 0.02 * X^3 - 0.3 * X^2 + 1.5 * X. A rolling rocker arm must also be created that follows the profile of the cam.. The diameter of the rocker arm must be 20 mm and its length 30 mm., Made of steel with surface treatment for durability. The rocker arm must be mounted to contact the cam surface, allowing a linear movement of the follower. Los archivos deben ser eXportados en formato STL con alta resolución para impresión 3D."

สเกล CFG

ขั้นตอน

เครื่องเก็บข้อมูล

euler

เมล็ด

3432085702

ตัวจัดตารางเวลา

ขนาดรูปภาพ

688 X 1024

โมเดล

SeaArt Infinity

สร้าง